Raid Setup (Intel Matrix) - EUROCOM Notebook V09.2.00 User Manual

Modules
Figure 7 - 29
Intel(R) Matrix
Storage Manager
Option ROM
Recovery Level
7
When selecting disks for
the Recovery RAID level
you will need to use the
Tab key to select a Mas-
ter disk, and the Space
key to select a Recov-
ery disk.
You can select the syn-
chronization between
the disks to be Continu-
ous (automatic) or On
Request (manually).
7 - 38 Setting Up SATA RAID or AHCI Modes

RAID Setup (Intel Matrix)

1. Press Ctrl + i to enter RAID configuration menu.
Intel(R) Matrix Storage Manager option ROM v8.5.0.1030 ICH10R wRAID5
1.
2.
RAID Volumes:
None Defined
Physical Disks:
Port Drive Model
0 FUJITSU MHY2120B K404T812P22B
1 FUJITSU MHY2120B K404T7C2KJ14
[ ] - Select
2. Select 1.Create RAID Volume and press Enter.
3. Type the RAID volume name and then press Tab or Enter to advance to the next
field.
4. Specify (use the up and down arrow keys) the RAID level (RAID 0 or RAID 1 or
Recovery - see Table 7 - 1, on page 7 -
advance to the next field.
5. Press Enter and the system will select the physical disks to use.
6. Press Enter and select (if applicable) the Strip Size (best set to default).
7. Press Enter and select the Capacity size (best set to default).
8. Press Enter to select Create Volume.
9. Press Enter to create the volume, and confirm the selection by pressing Y.
Copyright (C) 2003-08 Intel Corporation. All Rights Reserved.
[ MAIN MENU ]
Create RAID Volume 3. Reset Disks to Non-RAID
Delete RAID Volume 4. Recovery Volume Options
5. Exit
[ DISK/VOLUME INFORMATION ]
Serial # Size
111.7GB
111.7GB
[ESC]-Exit
36) and then press Tab or Enter to
* = Data is Encrypted
Type/Status(Vol ID)
Non-RAID Disk
Non-RAID Disk
[ENTER]-Select Menu