Intel® Matrix Driver Installation - EUROCOM Notebook V09.2.00 User Manual

10. This will now return to the main menu.
Intel(R) Matrix Storage Manager option ROM v8.5.0.1030 ICH10R wRAID5
Copyright (C) 2003-08 Intel Corporation. All Rights Reserved.
1. Create RAID Volume
2. Delete RAID Volume
RAID Volumes:
ID Name
0 MyRAID
Physical Disks:
Port Drive Model
0 FUJITSU MHY2120B K404T812P22B
1 FUJITSU MHY2120B K404T7C2KJ14
[ ] - Select
11. Select 5.Exit and press Enter, then press Y to exit the RAID configuration menu.
12. As the computer starts up, press a key when you see the message "Press any
key to boot from CD".
13. Press Enter to continue installing the operating system as normal (see your
Windows documentation if you need help on installing the Windows OS).
14. If you have selected a Recovery level RAID then see
Recovery Level RAID Systems" on page 7 -
15. Install the Windows drivers from the Device Drivers & Utilities + User's Manual
disc as per Table 4 - 1, on page 4 - 3
- see "Intel® Matrix Driver Installation" on page 7 -
[ MAIN MENU ]
3. Reset Disks to Non-RAID
4. Recovery Volume Options
5.Exit
[ DISK/VOLUME INFORMATION ]
Level Strip Size
RAID1(Mirror) N/A 111.7GB
Serial # Size
111.7GB
111.7GB
[ESC]-Exit [ENTER]-Select Menu
40.
(make sure you install the Intel Matrix driver
* = Data is Encrypted
Status Bootable
Normal Yes
Type/Status(Vol ID)
Member Disk(0)
Member Disk(0)
"Windows Installation for
42).
Setting Up SATA RAID or AHCI Modes 7 - 39
Modules
Figure 7 - 30
RAID Created
7