EUROCOM Notebook V09.2.00 User Manual page 176

Troubleshooting
Problem
The TouchPad doesn't
work.
The system freezes or
the screen goes dark.
The system never goes
into a power saving
mode.
The Wireless
Bluetooth/PC Camera
modules cannot
detected.
8
The Wireless
Bluetooth/PC Camera
modules cannot
configured.
The PC Camera
software displays
black screen when the
BisonCap software
run.
8 - 10 Problems & Possible Solutions
The Touchpad has been disabled. Press the Touchpad toggle (Fn + F1) key combination (make
sure you have installed the Touchpad driver.
The system's power saving features have timed-out. Use the AC/DC adapter, press a key on the
keyboard, or press the sleep (Fn + F4) key combination, or press the power button if no LEDs are
lit.
Power Options features are not enabled. Go to the Windows Power Options menu and enable
the features you prefer (see
on page D - 18). Make sure you have enabled Hibernate mode from the control panel.
LAN/ The modules are off. Check the appropriate LED indicator
module to see if the modules are on or off (see
be indicator is off, then press the appropriate function key combination in order to enable the
modules (see Table 1 - 4, on page 1 -
LAN/ The driver(s) for the module(s) have not been installed. Make sure you have installed the driver
for the appropriate module (see the instructions in
be module).
The software is using the incorrect device. If you have both an optional PC Camera and an optional
a TV Tuner module present, you will need to select which device to use with the BisonCap program.
Go to the Devices menu in the BisonCap program and select the USB Video Device device.
is
Possible Cause - Solution
"Power-Saving States" on page 3 - 6/"System Power Options"
"LED Indicators" on page 1 -
11).
Chapter 7 "Modules"
for the WLAN or Bluetooth
8). If the LED
for the appropriate