Pc Camera Module - EUROCOM Notebook V09.2.00 User Manual

Modules
Latest PC Camera
Driver Information
Check the disc, and any ac-
companying insert pages,
for the latest updated infor-
mation on the PC Camera
driver, which may override
the information provided
here.
PC Camera Display
7
The PC Camera applica-
tion software needs to be
run while the default note-
book LCD is the selected
display device.
After a camera picture is
obtained on the default
notebook LCD, you may
then use the Fn + F7 to tog-
gle through the display
modes (give the screen
time to refresh).

7 - 20 PC Camera Module

PC Camera Module

The PC Camera module uses the BisonCap application to capture video files. Be-
fore installing the PC Camera driver, make sure that the optional PC Camera is on.
Use the Fn + F10 key combination (see
er to the PC Camera module. Make sure you install the drivers in the order indi-
cated in Table 4 - 1, on page 4 -
PC Camera Device and TV Module
If you have both an optional PC Camera and an optional TV Tuner module present, you will
need to select which device to use with the BisonCap program. Go to the Devices menu
in the BisonCap application and select the BisonCam, NB Pro device.
Table 1 - 4, on page 1 -
3.
11) to toggle pow-