Nvidia 3D Shutter Glasses Kit - EUROCOM Notebook V12.3.10 User Manual

NVIDIA 3D Shutter Glasses Kit

The NVIDIA 3DVISION™ 2 shutter glasses kit is supported only by Model B
computers which include the built-in 3D emitter and shutter glasses kit. Install
the video driver as indicated in
Make sure you read all the enclosed safety instructions and precautions included in the NVIDIA 3D
Vision Kit before setting up the 3D Glasses and IR Emitter. Follow the setup instructions provided in
the documentation to set up the 3D Vision kit safely and take the "User Vision Test," which will initiate
when you turn on your GeForce 3D Vision for the first time. If you cannot see the image in 3D during
the test, you should DISCONTINUE USE IMMEDIATELY. Continued use may result in health-related
complications.
The NVIDIA 3DVISION shutter glasses kit is supplied with a single pair of shutter
glasses and all necessary cables etc. Set up the hardware (run the set up wizard as
indicated overleaf) as instructed in the manual supplied with the kit, however make
sure you have installed the NVIDIA driver from the Device Drivers & Utilities
+ User's Manual disc. For further details contact your service center.
After the NVIDIA driver has been installed you can setup NVIDIA 3D Vision.
"Video (VGA)" on page 4 -

Important Safety Instructions
NVIDIA Video Driver Controls
6.
NVIDIA 3D Shutter Glasses Kit C - 23

NVIDIA Driver
Install the NVIDIA driv-
er (see "Video (VGA)"
on page 4 - 6) from the
Device Drivers & Utili-
ties + User's Manual
disc (to ensure compat-
ibility).
C