Table of Contents
Advertisement
Modules
7
7 - 8 Setting Up SATA RAID or AHCI Mode
6.
Make sure your USB Flash drive or external USB hard disk is attached to one of
the USB ports on the computer.
7.
Click "I accept the license terms" tickbox and click Next.
8.
Click Custom (advanced).
9.
Click to select Load Driver when the "Where do you want to install Windows?"
screen appears.
10. Click Browse and browse to the location you copied the files to on your USB Flash
drive or external USB hard disk (X: denotes your USB Flash drive or external USB
hard disk):
• Windows 7 32bit - X: \00IRST\f6flpy\RSTe_f6_iaStorA_32\
• Windows 7 64bit - X: \00IRST\f6flpy\RSTe_f6_iaStorA_64\
11. Click OK > Next (or format the drive to your preferences).
12. Follow the on-screen instructions to install the Windows 7 operating system.
13. Install the Windows drivers from the Device Drivers & Utilities + User's Manual
disc as per
Table 4 - 1, on page 4 - 3
Storage Technology driver - see
(make sure you install the Intel Rapid
"IRST Driver Installation" on page 7 -
9).
Advertisement
Table of Contents
Need help?
Do you have a question about the Notebook V12.3.10 and is the answer not in the manual?
Questions and answers