EUROCOM Notebook V12.3.10 User Manual page 148

Modules
7
Figure 7 - 2
RAID Created
7 - 6 Setting Up SATA RAID or AHCI Mode
5. Press Enter and the system will select the physical disks to use.
6. Press Enter and select (if applicable) the Strip Size (best set to default).
7. Press Enter and select the Capacity size (best set to default).
8. Press Enter to select Create Volume.
9. Press Enter to create the volume, and confirm the selection by pressing Y.
10. This will now return to the main menu.
11. Select 4.Exit and press Enter, then press Y to exit the RAID configuration menu.