EUROCOM Notebook V12.3.10 User Manual page 136

Upgrading The Computer

Heat Sink Screws
Make sure you remove
the heat sink screws in
the order 13 -
(screw 13 first to screw
18 last). This order is in-
dicated on the label (and
on the heat sink itself).
6
Caution
The heat sink, and video
card area in general,
contains parts which are
subject to high tempera-
tures. Allow the area
time to cool before re-
moving these parts.
Figure 6 - 27
Fan Units & Video
Card Heat Sink
Screws Removal
6 - 24 Upgrading the Video Card
4. The video card(s) will be visible at point
pictured).
5. Carefully disconnect the video card fan cable(s)
6. Remove the video card fan(s)
7. Remove screws
sink unit label (and heat sink itself).
18
12
7
(two video card fans are pictured here).
12
- from the heat sink in the order indicated on the heat
13 18
7
12
on the mainboard (two video cards are
, and remove screws
8
9 9
11
10 10
8
16 14 16
13
15 13
18 17 18
- .
9 11
11
8
14
15
17