EUROCOM Notebook User Manual page 161

Camera Application
The WebCam application is a video viewer for general purpose video viewing and
testing, and for capturing video files to .avi format.
1. Run the camera application from the desktop shortcut (it is recommended that you
set the capture file before the capture process - see below).
2. Go to the Capture menu heading (if you wish to capture audio check
Audio Setup" on page 7 -
3. Click OK/Yes (the file location will be displayed in the pop-up box) to start
capturing the video, and press Esc to stop the capture (you can view the file using
the Windows Media Player).
Set Capture File
Prior to capturing video files you may select the Set Capture File... option in the
File menu, and set the file name and location before capture (this will help avoid ac-
cidentally overwriting files). Set the name and location then click Open, then set the
"Capture file size:" and click OK. You can then start the capture process as on the
previous page.
Note the important information in
order to save file space, and help prevent system problems.
23) and select Start Capture.
"Reducing Video File Size" on page 7 - 26
Pre-Allocating File
Size/Space
You may pre-allocate the
"PC Camera
file size (File > Allocate
File Size/Space) for the
capture file in the camera
program (you may need
to set a folder location
first).
Pre-allocating space on
the hard disk can improve
the capture quality (par-
ticularly of large capture
files), by reducing the
amount of work the hard
disk has to do in finding
space for the video data
as it is being captured.
in
See also
eo File Size" on page 7 -
26.
PC Camera Module 7 - 25
Modules
7
"Reducing Vid-