EUROCOM Notebook User Manual page 187

Problem
After using the Fn + F11
key combination to
switch the WLAN module
off and have, restarted
the computer, shut the
computer down and
started up again, or
recovered from hibernate
mode, you experience
problems with powering
the WLAN module on
again.
This is a known problem and Intel have provided a beta WLAN driver to address this issue. The
beta WLAN driver is provided on the Device Drivers & Utilities +User's Manual disc.
1. Insert the Device Drivers & Utilities + User's Manual disc and click Browse
CD/DVD.
2. The driver is located in the following location on the disc:
Others\01_WLan\Shirley(Beta)
3. Use the Fn + F11 key combination to power ON the WLAN module before
installing the driver (check the LED indicator to make sure the WLAN module is
ON).
4. Double-click the executable setup file and follow the on-screen instructions to
install the driver.
Possible Cause - Solution
Problems & Possible Solutions 8 - 13
Troubleshooting
8