EUROCOM Notebook User Manual page 142

Modules
Figure 7 - 2
RAID Created
7
7 - 6 Setting Up SATA RAID Mode
10. This will now return to the main menu.
Intel(R) Rapid Storage Technology - Option ROM - 9.5.0.1008
Copyright (C) 2003-09 Intel Corporation. All Rights Reserved.
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
RAID Volumes:
ID Name
0 MyRAID
Physical Disks:
Port Drive Model
2 FUJITSU MHY2120B K404T812P22B
4 FUJITSU MHY2120B K404T7C2KJ14
[ ] - Select
11. Select 6.Exit and press Enter, then press Y to exit the RAID configuration menu.
12. Make sure the Windows 7 OS DVD is in the DVD drive. and as the computer
starts up it will automatically boot from the Windows 7 OS DVD.
13. Click Next to continue installing the operating system as normal (see your
Windows documentation if you need help on installing the Windows OS).
14. Install the Windows drivers from the Device Drivers & Utilities + User's Manual
disc as per Table 4 - 1, on page 4 - 3
- see "Intel® Matrix Driver Installation" on page 7 -
[ MAIN MENU ]
4. Recovery Volume Options
5. Acceleration Options
6. Exit
[ DISK/VOLUME INFORMATION ]
Level Strip Size
RAID1(Mirror) N/A 111.7GB
Serial # Size
111.7GB
111.7GB
[ESC]-Exit [ENTER]-Select Menu
(make sure you install the Intel Matrix driver
Status Bootable
Normal Yes
Type/Status(Vol ID)
Member Disk(0)
Member Disk(0)
7).