Raid Volume Data Verification And Repair; Replacing And Reverting Recovery And Master Volumes - EUROCOM Notebook User Manual

RAID Volume Data Verification and Repair

The RAID volume data verification process identifies any inconsistencies or bad
data on a RAID 0 or RAID 1 volume. The table outlines what occurs for each RAID
level:
RAID
Level
RAID 0 Bad blocks are identified.
Bad blocks are identified.
RAID 1
Data on the mirrored drive is compared to
data on the source drive.

Replacing and Reverting Recovery and Master Volumes

If a master or recovery drive fails you will need to add a new identical drive and re-
build the recovery volume to the drive. You can also revert the master drive to the
state of the previous volume update. For details on how to do this see
Storage Manager Help" on page 7 -
See over for details on how to verify and repair RAID volume data.
Verify
N/A
Bad blocks are reassigned.
If the data on the mirrored drive does not
match the data on the source drive, the
data on the mirrored drive is overwritten by
the data on the source.
8.
Verify & Repair
"Intel Matrix
Setting Up SATA RAID Mode 7 - 9
Modules
Table 7 - 2
RAID Verification &
Repair Status
7