The Setup Utility; Entering Setup - EUROCOM Notebook User Manual

BIOS Utilities
BIOS Settings
Warning
Incorrect settings can
cause your system to
malfunction. To correct
5
mistakes, return to Set-
up and restore the Set-
up Defaults with <F9>.

5 - 4 The Setup Utility

The Setup Utility
The Phoenix Setup utility tells the system how to configure itself and manage basic
features and subsystems (e.g. port configuration).

Entering Setup

To enter Setup, turn on the computer and press F2 during the POST. The prompt
(Press F2 to Enter Setup) seen in Figure 5 - 1 on page
few seconds after you turn on the system. If you get a "Keyboard Error", (usually
because you pressed F2 too quickly) just press F2 again.
If the computer is already on, reboot using the Ctrl + Alt + Delete combination and
then hold down F2 when prompted. The Setup main menu will appear.
5 - 2 is usually present for a