Nuendo Monitor Setup - Euphonix MC Media Application Controller Operation Manual

Euphonix Media Application Controller Operation Manual
7. Press Download to transfer the license onto your USB dongle.
8. Close the wizard and open Nuendo.
The Nuendo EuCon Adapter must be installed during the EuConWS software installa-
tion (see page 17). Note that this is the MC Client's Nuendo adapter. For Nuendo to
communicate with the MC, Nuendo's EuCon device must be added in the Device Setup
dialog:
1. Choose Device Setup from Nuendo's Devices menu.
The Device Setup dialog opens.
2. Click the + button (add) on the top-left.
A drop-down list of devices appears. EuCon should appear near the top of the
list. If not, close Nuendo and use the EuCon Workstation installer to install the
Nuendo EuCon Adapter (optional in Windows installer, installs by default with
the Mac installer).
3. Select EuCon from the drop-down list.
The EuCon device is added and the MC's surface immediately updates with the
Nuendo default App Set and the MC faders & Soft Knobs display track func-
tions. On the System 5-MC, Nuendo channels are displayed on the CM408T
strips, beginning with channel 1 on the leftmost strip (to rearrange the order of
CM408T modules see page 26).
11.2.2

Nuendo Monitor Setup

The MC's Monitors section can control Nuendo's Control Room Mixer. The Monitors
and Control Room sections (top-left of the MC surface) mirror their related GUI con-
trols in Nuendo: Adjusting the MC's controls updates Nuendo's GUI controls and vice
versa.
To enable this functionality, use the following procedure to set up the Control Room in
Nuendo:
1. In Nuendo, choose Devices->VST Connections.
The VST Connections dialog opens.
2. Click Studio (right-most tab).
3. Click the Enable Control Room button at the top-right of the window.
Nuendo's Control Room Mixer is now enabled. You may now set up the mon-
itoring busses and talkback source.
93
DAW Integration