Euphonix MC Media Application Controller Operation Manual page 112

Euphonix Media Application Controller Operation Manual
Using and Modifying Plugins
The MC can instantiate and edit ProTools plugins.
To instantiate plugins:
1. Make sure the channel you are editing is in the first HUI since only these chan-
nels support plugin instantiation and editing.
Channels on the first HUI show a blue border around the track name in the Pro
Tools Edit and Mix windows.
If the channel is not in the first HUI, use the HUI channel forward/back buttons
on the MC Right Edit section Soft Keys.
Do NOT use the MC Bank nor Nudge buttons as they do not affect the HUI
banking, but only move the HUI channels on the surface.
HUI banking works differently than on the MC. Pressing a HUI Bank Left or
Right Soft Key causes the channels to bank by as many HUI channels as are
configured. So, if you have 4 HUIs configured in Pro Tools peripherals, press-
ing a HUI Bank Soft Key banks by 32 channels.
2. Attention the track to the Soft Knobs by touching the Wave key on the Main
Touchscreen and then touching the channel in the Touchscreen or by pressing
the channel's Wave key on the CM408T module (System 5-MC).
3. Press the Channel Insert Soft Knob.
This is second from bottom on the right side of Soft Knobs section.
4. In the second bank of Soft Keys (press Bank 2), press DSP Assign at the top-left.
The DSP Assign Soft Key flashes.The leftmost four Soft Knobs (emulated
HUI V-Pots) are now selectors for the first four plugins on your channel.
5. Turn one of the knobs to cycle through plugin choices shown on the Soft Knob
key and HUI display on the MC Touchscreen.
6. Press the Soft Key next to that knob to confirm the selection.
7. Repeat with the other three knobs to set the other inserts.
8. To set the fifth insert, turn the Insert Parameter Scroll knob at the top-right
of the Soft Knobs section.
The emulated HUI display on the Touchscreen changes to show the fifth insert.
9. Turn the Select 1 Soft Knob to select the plugin and press the Soft Key to confirm.
10. When finished, press the DSP Assign Soft Key to exit the plugin insertion mode.
112
DAW Integration