Getting Started - Euphonix MC Media Application Controller Operation Manual

Euphonix Media Application Controller Operation Manual
Leave the Station ID at its default setting of 1 unless you have multiple con-
trollers, in which case simply increment the setting (i.e., if two controllers are
installed, set the Station ID = 3 for the MC).
11. Press OK to exit that dialog, press OK on the Controller Properties dialog and
press OK on the General Settings dialog.
12. Close Pyramix, reboot the workstation, and then open Pyramix Virtual Studio.
Pyramix will not connect to the MC properly without rebooting the workstation.
The MC will now load the default Pyramix Application Set if a project is open. Other-
wise, the Application Set will not be loaded, but the Soft Keys at the top-left illuminate
to show that EuCon communication is enabled.
NOTE: Since the MC only accesses the functions of Pyramix Virtual Studio, this manual
does not document those functions. Refer to the Pyramix Virtual Studio manual
for specific information.
11.3.2

Getting Started

To quickly get started:
1. Open Pyramix Virtual Studio by double-clicking the shortcut on the Windows
desktop or select it from the Start menu.
2. Use the right trackball and keyboard on the MC to control the Pyramix work-
station.
When Pyramix first launches (before a project is loaded), the default MC Ap-
plication Set displays the following options on the MC's Soft Keys (Pref,
View, Edit, Automation, Open, Save, and New Project From Template).
For those unfamiliar with Pyramix, we suggest starting with a template project
that has tracks, routing, and monitoring already set up. Merging Technologies
has created several projects to easily and quickly begin working with Pyramix.
3. Press the New Project From Template Soft Key.
A dialog box opens containing the contents of the Pyramix Template folder.
Double-click on the Euphonix folder to choose from the template projects cre-
ated by Merging Technologies.
106
DAW Integration