Chapter 7: Working With Channels; Channel Strips; Solo; Channel Strips Section - Euphonix MC Media Application Controller Operation Manual

Euphonix Media Application Controller Operation Manual

Chapter 7: Working with Channels

7.1

Channel Strips

The MC has four channel strips to which workstation tracks can be assigned. The track
names assigned to these strips are displayed in the top-right corner of the Main-Tracks
touchscreen. Workstation tracks can be assigned to the strips using the Channel Select
and Wave strip keys, or using the Layouts-Assign Touchscreen. The System 5-MC has
two motorized joystick panners in place of the four faders.
7.1.1

Solo

When activated, this button solos the assigned channel. Solo preferences are set on the
Preferences-Solo Touchscreen (see page 37).
Figure 7-1 Channel Strips Section
59