Chapter Three; Operating Your Vcr; Setting Upyourvcr For The Firsttime; Setting Up Your Vcr If You Are Using A - Mitsubishi HS-U410 Owner's Manual

A_ CHAPTER THREE Operating Y ourVCR
Now that you've completed your antenna, VCR, and TV connec-
tions, you're ready to start enjoying your equipment. To get the
most satisfaction out of your VCPo, you should carefully read the
two sections, "Setting Up Your VCR for the First Time" and
"Viewing the Picture Coming from Your VCR." Taen you can start
exploring what your new VCR can do.
In this chapter, you'll learn:
Setting Up YourVCR for the FirstTime
$ Usingthe RemoteControl
Viewingthe Picture Comingfrom Your VCR
Loading and UnloadingTapes
$ Playing a Tape
Selectingthe On-screenLanguage
Using the Audioand Video Functions
$ Using the Menus to Set the Time
Programmingthe VCR to ReceiveTV Channels
Recording
Setting UpYourVCR for the FirstTime
It's important that your VCR is ,;et up correctly _efore you t_r to
work it. If you carefully read this section, you will avoid confusion
later and get the most out of operating your system.
This section teaches you about:
Setting up your VCR if you are using a regular TV, and
Setting up your VCR if you are using a m _nitor TV.
Sett g upyour VCR if you are using a regularTV
O Turn on your TV and turn it to channel 3 or 4, whichever is
NOT used for broadcast in your area.
.... _ Look at the back panel of the VCR and set; tse VIDEO CttAN-
__ _/]LII_ =i_ .... __ TV.NEL s witch to channel 3 or 4, whichever is 1;he same as the
Turn the VCR on by pressing the POWER button.
18