Chapter Three; Operatingyourvcr; Setting Upyourvcrfor The Firsttime; Setting Up Your Vcr If You Are Using A - Mitsubishi HS-U110 Owner's Manual

CHAPTER THREE
OperatingYourVCR
Now that you've completed your antenna, VCR, and TV connec-
tions, you're ready to start enjoying your equipment. To get the
most satisfaction out of your VCR, you should carefully read the
two sections, =Setting Up Your VCR for the First Time" and
"Viewing the Picture Coming fl:om Your VCR" Then you can start
exploring what your new VCR ,can do.
In this chapter, you'll learn:
$ Setting Up Your VCR for the First Time
$ Usingthe RemoteControl
$ Viewing the Picture Coming from YourVCR
Loadingand UnloadingTapes
$ Playinga Tape
Selectingthe On-screenLanguage
Usingthe Audio and Video Functions
Usingthe Menus to Set the Time
Programmingthe VCRto ReceiveTV Channels
$ Recording
Setting UpYourVCRfor the FirstTime
It's important that your VCR is set up correctly before you try to
work it. If you carefully read this section, you will avoid confusion
later and get the most out of operating your system.
This section teaches you about:
• Setting up your VCR if you are using a regular TV, and
• Setting up your VCR if you are using a monitor TV.
Setting upyour VCR if you are using a regular TV
0
0
Turn on your TV and turn it to channel 3 or 4, whichever is
NOT used for broadcast in your area.
Look at the back panel of t:he VCR and set the VIDEO CHAN-
NEL switch to channel 3 or 4, whichever :is the same as the
TV.
O Turn the VCR on by pressing the POWER button.
18