Operation - Maytag 23-11-2214N-002 User Manual

Operation°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
4. CONTROL PANEL
Caution: If air conditioner is shut off, wait a minimum of three minutes before restarting.
Closed ............................................................................................................. Open
AirExchanger
Low Fan • • High Fan
Low Cool • • High Co_l
o
Master CoNtro[ Mediumcool Thermostat
Control Functions
1.Air Exchanger: Circulates fresh air and helps remove stale air when in tile open position. Maximum air circulation and
cooling occur when in the closed position.
2.Master Control: Either turns unit off or selects desired function: Cooling with continuous air circulation or air circu-
lation without cooling.
3.Temperature: Controls unit thermostat, which regulates room temperature by automatically turning compressor on
and off.
Cooling Operation
1.Close Air Exchanger.
2. Turn Temperature Control to COOLER.
3. Turn Master Control to SUPER COOL.
4. If room becomes too cool for comfort, turn Temperature Control counterclockwise until compressor turns off (air cir-
culating fan will remain in operation).
S. When the desired comfort level is reached, Master Control may be turned to lower setting.
6. To turn unit off, or in event of a power interruption, turn Master Control to OFF.
Air Circulation Without Cooling
To circulate and filter indoor air, proceed as follows:
1. Close Air Exchanger.
2. Turn Master Control to HIGH FAN.
Exhaust Operation Without Cooling
To exhaust stale or smoky air, proceed as follows:
1. Open Air Exchanger.
2. Turn Master Control to HIGH FAN.
4