Operation; Electronic Control Panel - Maytag 23-11-2198N-009 User Manual

OPERATION
EI.ECTRONIC CONTROI.S
ELECTRONIC CONTROL PANEL
Power Control
The Power Control turns the unit on and off.
The Temperature/Hour Display
Shows the set temperature or the timer setting. THE TEMPERATURE DISPLAY ONLY
SHOWS THE SET TEMPERATURI:, NOT THE ACTUAL. ROOM TEMPERATURE.
Temperature/Hour Controls
These buttons are used to raise or lower the set temperature in increments of 1 o from
66 ° to 88 °. They also raise or lower the hour setting in increments of 1 from 00 to 24
when the timer is being set. In order to toggle between °F or °C, depress both of the
controls at the same time.
Mode Control
The Mode Control has two settings: FAN and COOl .....
The settings are adjusted with the Mode Control button. A green light indicates which
setting is currently being used. When the COOl. mode is selected, the unit will circulate
and cool the air.
If the FAN mode is selected, the unit will only circulate the air.
Fan Speed Control
The Fan Speed Control has three
settings: High, I_ow and Auto. The settings are adjusted with the Fan Speed button,
each time the button is depressed it changes the
setting. A green light will indicate which setting is currently being used.
When the Auto feature is selected while the air conditioner is in the COOl. mode, the
fan speeds will change automatically as the temperature in the room changes.
• 4 ° or more above the set temperature the unit will be in HI FAN mode.
• 4 ° or less above the set temperature the unit will be in LO FAN mode.
Timer Control
The timer can be set to either lure the unit on or off.
To turn the unit on using the Timer:
• Depress the timer key when the power is off, the display will read 00. Adjust to the
desired number of hours before TURN ON using the up/down arrows.
• The display will show the time by hours [eft until TURN ON.
• To Turn the timer off, depress the timer key.
• A green light next to the Timer Control indicates that the timer is set.
To turn the unit OFF using the Timer:
• Depress the timer key when the power is on, the display will read 00. Adjust to the desired
number of hours beforeTURN OFF using the up/down arrows. The display will automatically
go back to the set temperature after 10 seconds.
• To display the amount of time left until TURN OFF, depress the timer button once.
• To turn the TIMER OFF, depress the timer button twice.
• A green light next to the ]]mer Control indicates that the timer is set.
.Izl
©
Power Control
Temperature/Timer Display
O Temperature/Timer Controls
Mode Control
Far] Speed (ontrol
O Timer On/Off
Built-in three minute timing delay.
If this electronic unit will not respond
to touch pad or remote control
commands, it is necessary to unplug
the unit from the electrical outlet for
five seconds and then plug the unit
back in.
Auto restart feature:
In the event of a power failure,
this feature allows the unit to
resume operation once power has
been restored, retaining the most
recent settings
4