Using
the Pouring
Shield*
Attaching
the Pouring
Shield
1. Make sure the speed control lever
is set to the OFF/0 position.
2. Unplug
the Stand
Mixer.
3. Attach desired accessory and raise
the mixing bowl.
4. Slide pouring shield collar around
beater shaft, centering collar over
rim of bowl.
Using
the Pouring
Shield*
Pour ingredients
into the mixing
bowl
through
the chute
portion
of
shield.
IMPORTANT: Make sure the guides
on the bottom
of the chute rest
on the rim of the bowl to keep
ingredients
from falling outside
the bowl as they are added.
Pouring
Chute
\
Removing
the Pouring
Shield
1. Make sure the speed
control
lever
is set to the OFF/0 position.
2. Unplug
the Stand
Mixer.
3. Slide the pouring
shield
off the
bowl.
*Included
with
some models.
4. Lower the bowl
support
by turning
the bowl-lift
lever down.
5. Remove accessory and the mixing
bowl.
Cleaning
the Pouring
Shield
Wash in warm, sudsy water. If you
wish, you may place on the top rack
of your dishwasher.
10