Optional Attachments; Using The Pouring Shield - KitchenAid 5KSM150PSP Series Manual

OPTIONAL ATTACHMENTS

KitchenAid offers a wide range of optional attachments such as the Spiralizer, Pasta
Cutters, or Food Grinder that may be attached to the Stand Mixer attachment power hub
as shown below.
1
Turn the Stand Mixer to "0" (Off) and
then unplug the stand mixer.
3
Insert attachment into attachment hub,
making certain that attachment power
shaft fits into the square attachment hub
socket.

USING THE POURING SHIELD*

1
For best results, rotate the Pouring
Shield* so the motor Head Covers the
U-shaped gap in the shield. The pouring
chute will be just to the right of the
Attachment Hub as you face the mixer
*Included with select models only. Also available as an optional accessory.
10
2
Remove the attachment hub cover.
4
Tighten the attachment knob by turning it
clockwise until the attachment is secured
to the Stand Mixer.
2
Pour ingredients into the bowl through
the pouring chute.