Jenn-Air JDR8895ACB Use & Care Manual page 25

AINTENANCE
Leve_ing Legs
Be sure the antbt@ bracket secures one of the rear
from accidentally tipping.
Remova_ of Gas Appliance
Gas appiiance connectors used to connect this appiiance to
the gas suppiy are not designed for continuous movement.
Once installed, DO NOT repeatediy move this gas appiiance
for cbaning or to rdocate. If this appiiance has to be moved
and/or removed for servicing, follow the procedure described
in the installation instructions. For information, contact Jenn-
Air Customer Service at 1-800-JENNAIR (1-800-536-6247[).
To prevent range from acddentaHy tipping, range must be
secured to the floor by siiding rear leveling leg into the anti-
tip bracket.
Convenience OutJet
(Canadian models only}
The convenience outlet is located on the lower left side of the
backguard. Be sure appliance cords do not rest on or near the
surface elemenL If the surface dement is turned on, the cord
and outlet wiii be damaged.
The oonven,ence out,et c, rcu,t breaker I- ::
may trip if the small appliance phJgged }i
into it exceeds 10 amps. To reset the
circuit breaker, press the switch
located on the lower edge of the
backguard.
©
CIRCUIT BREAKER
24