Jenn-Air JDR8895ACB Use & Care Manual page 11

OOKING
Baking with Convection
(lower oven only)
When convection baking, enter your normaHbaking tempera-
ture, The eontro[ wi[[ automadea[[y reduce the set oven
temperature by 25° (even though normaHbaking temperature
is dispHayed).
To set Convect Bake:
1. Press the Convect Bake pad .... Bake ...........
, LOWER BAKE and the FAN icon will flash. .............
Autoset
° 000 will flash hi the display. , ..................
2. SeHectthe oven temperature. Press the Autoset pad for
350° F or the appropriate number pads.
, Each addidonaH press of the Autoset pad will increase
the temperature by 25 degrees. The oven temperature
can be set from 170° to 550°,
3. Press Convect Bake pad again or wait four seconds.
, LOWER BAKE will stop flashing.
, PREHEATand LOWER will light in the display.
, 100° or the actual oven temperature if over 100° Fwill
display. It will rise in 5° increments until the preset
temperature is reached.
, The FAN icon will start to rotate.
4. Allow the oven to preheat for 7-12 minutes.
, When the set oven temperature is reached, one long
beep will sound and PREHEATwill turn off.
, The set temperature will display.
, To recall the set temperature during preheat, press the
Convect Bake pad.
5. Place food in the oven.
6. Check cooking progress at the minimum cooking time.
Cook longer if needed.
7. When cooking is finished, press Lower Cancel pad.
8. Remove food from the oven. ....
Lower ",
Roasting With Convection
(lower oven only)
When convection roasting, enter your normal roasting
time and temperature° The control will automatically
prompt you to check the food for aloneness at 75% of the set
time.
Convect Roast Notes:
° When convection roasting, the cooking time must be set
before setting the temperature.
° If your recipe requires a preheated oven, add 15 minutes
to the cooking time programmed.
° Roasting times can vary with different cuts of meat.
, It is not necessary' to preheat when convect roasting
large cuts of meat.
° Refer to "Cooking Made Simple" booMet for suggested
roasting temperatures and times.
To set Convect Roast:
1. Press the Convect Roast pad. , Roast .....
° LOWER ROAST,tile FAN icon and 00:00
will flash in the display.
° 000 lights in the display.
2. Enter the roasting time using the number pads.
, Time can be set from 10 minutes (00:10} to 11 hours,
59 minutes (11:59].
, Press Convect Roast again or wait 4 seconds.
° LOWER ROAST and the fan icon flash in the display.
° 000 will flash in the display.
3. Select the oven temperature. Press the Autoset
Autoset pad for 325° F or the appropriate \ .......
number pads. (Refer to Cooking Made Simple for roasting
times.)
° Each additional press of the Autoset pad will increase
the temperature by 25£
° The oven temperature can be set from 170° to 550£
4. Press Convect Roast pad again or wait four seconds.
° ROASTwill stop flashing and light in the display.
° 100° or the actual oven temperature will display. It will
rise in 5° increments until the preset temperature is
reached.
° The FAN icon will start to rotate.
Place food in the oven.
° Time will begin counting down once the oven starts
heating up.
° To recall the set temperature during preheat, press the
Convect Roast pad.
eonto
10