Setting Up The System - Denon ADV-700 Operating Instructions Manual

[]_] SETTING UP THE SYSTEM
• Speaker system layout
Basic system layout
• The following is an example of the basic layout for a system consisting of six speaker systems and a television monitor:
• Once all connections with other AV components have been completed as described in "CONNECTIONS" (see pages 5 to 8),
make the various settings described below on the monitor screen using the ADV-700's on-screen display function.
• Use the following buttons to set up the system:
button
I:;:oSS:she'::s
b:itt:hn tthecdiS_eYt'e the setting .
__9,_®. G,D < and > :
.. and":
oo, oo
o o isE,upbu.o nPressth'st°
display system setup menu.
the
Use these to move the cursors ( ( and ) ) to the left and right
on the screen.
Use these to move the cursors (_, and v) to the up and down
on the screen.
Setup items and default values (set upon shipment from the factory)
QUICK SETUP
SPEAKER
CONFIGURATION
DELAY TIME
CHANNEL
co LEVEL
AV1 VIDEO
i OUTPUT
DVD AUTO
POWER OFF
<( DISC SETUP
OSD SETUP
_ VIDEO SETUP
AUDIO SETUP
RATINGS
OTHER SETUP
Setup
Quick system settings
Input the combination of speakers in your system and
their corresponding sizes (SMALL for reguJar speakers,
LARGE for full-size, fulErange) to automatically set the
composition of the signals output from the speakers and
the frequency response
This parameter is for optimizing the timing with which the
audio signals are produced from the speakers and
subwoofer according to the listening position
At the listening position, listen to the test tones Output
from the different speakers and set so that the playback
level from the different speakers is equal
To select whether composite video signals or S video
signals or RGB signals will be output from the AVf SCART
terminals.
The power automatically switches to standby if no
operation is performed for 30 minutes while in the stop
mode with the function set to DVD.
Set the audio language, subtitle language and disc menu
language for when playing discs
Set the wallpaper for the setup and operation screens
Set the screen size and video system for the TV being
used
Set the digital audio signal format and the linear PCM
sampling frequency and bit conversion
Make the playback restriction setting for DVDs with
restricted viewing and set the password required for
changing the setting.
Make the closed caption setting for DVDs (A
commercially available decoder is required to display the
closed captions.)
Default settings
FRONT SP CENTER SR SURROUND SP SUB WOOFER
SMALL 27m (9 ft) SMALL 24m (8 ft SMALL 2 lm (7 ft) YES 27m (9 ft)
FRONT SP CENTER SR SURROUND SP SUB WOOFER
SMALL SMALL SMALL YES
SW EREQ = 120 Hz / SW MODE = NONE
FRONT & SW CENTER SURROUND
27m (9 ft) 2.4m (8 ft) I 2Im (7 ft}
I
FRONTL CENTER FRONTR SURROUNDR SURROUNDL SUBWOOFER
0dBI 0dBIOdB 0dB I 0dB I 0dB
VIDEO OUTPUT DVD RGB OUTPUT
VIDEO I NO (VIDEO)
NO (power does not turn off automaticaJly)
DIALOG I SUBTITLE DISC MENU
i
ENGLISH I ENGLISH ENGLISH
WALL PAPER: BLUE
TV ASPECT TV TYPE
4 : 3 PS PAL
DIGITAL OUT LPCM SELECT
NORMAL OFF
RATING LEVEL PASS WORD CHANGE
NO LIMIT 0O0O (Default)
CLOSED CAPTION : OFF
Subwoofer
r
Front speaker systems
Set these at the sides of the TV or
screen with their front surfaces as
flush with the front of the screen as
possible.
peaker system
Surround speaker systems
12