Denon ADV-700 Operating Instructions Manual page 28

1_] LISTENING TO THE RADIO
Use this to automatically search for FM broadcasts and store up to 40 stations at preset channels 1 to 40.
NOTE:
• If an FM station cannot be preset automatically due to poor reception, use the "Manual tuning" operation to tune in the station,
then preset it using the manual "Preset memory" operation.
Using the TUNER function, press
and hold the TUNING + and TUNING
- buttons of the main unit for 2 %_%(_(-'_-_
seconds or longer.
• "AUTO PRESET?" and "-: NO/+:
START" will alternately appear on Main unit
the display of the main unit.
1,2
• Press the TUNING - button to cancel.
2
Use the TUNING + button to select
"START".
"SEARCB" f,ashes on the display and O _,_ searching begins, UNIN
"COMPLETED" appears once searching _
is completed. Main unit
23 1
Example: Tuning in FM/AM stations
Before operating the remote control unit!
Be sure to press the proper remote control
mode selector button to set the remote control
unit to the AV mode.
Turn the FUNCTION/SELECT knob of the main unit or
press the FUNCTION button of the remote control and
select "TUNER".
FUNCTION
FUNCTION /SELECT
Main unk Remote control unit
Select "FM" or "AM".
• The selected "FM AUTO", "FM MONO" or "AM" is
displayed.
• When using the remote control, the mode button is
used to select FM AUTO and MONO.
Main unit Remote control unit
3
OC)OO
© <_'G"
--I
2--_0 .......
3--
Adjust the receiving frequency.
• When a
station is " -- __.. (_+
received, the_:,i_\" ,u \
"TUNED" ""_-,,
indication will
light.
Main unit Remote control unit
NOTE:
A humming sound may be heard when using a TV nearby
while receiving AM programs. If this happens, move the
system as far from the TV as possible.
Auto tuning
• When one of the Tuning +/- button is pressed, the
frequency changes in steps of 50 kHz in the FM band,
9 kHz in the AM band.
• If one of the Tuning +/- button is held for over 1 second,
the frequency continues to change when the button is
released (auto tuning) and stops when a station is tuned
in.Tuning will not stop at stations whose reception is
poor.
• To stop the auto tuning function, press the Tuning +/-
button once.
FM Stereo Reception
• When a program being broadcast in "FM AUTO" is
received, the "ST" indicator lights and the program is
received in stereo.
• If reception is poor and there is much noise in the
stereo signals, press the BAND or MODE button to set
the FM MONO mode.
28