Denon ADV-700 Operating Instructions Manual page 40

I_ CHANGING THE DEFAULT SETTINGS (DVD)
• The initial setting that was set prior to shipping from I 2 _. - _
the factory can be changed. " _(_ (
The setting contents are maintained until they are next
changed even when the power is switched off. /_,,(_")v _ (_ -- 1,2
_® G.......
Before operating the
remote control unit]
• Be sure to set the
DVD mode using
the remote control
mode selector
buttons.
1
In the stop mode, press the SETUP button.
1
At the Setup Menu, use the /_. and v ccursor sFu_
buttons to select "DVD SETUP" and press the ("_
ENTER button. I_ I_
Remote control unit
2
The setup (default settings) screen "DVD SETUP
MENU" appears.
• DISC SETUP
Use this to set the language to be used when
playing the disc,
If the set language is not offered on that disc,
the discs default language is set.
• OSD SETUP
Use this to set the language for the default
setting screen and messages displayed on the
TV screen (" PLAY", etc_) and wall paper color_
• VIDEO SETUP
Use this to set this unit screen mode.
(TV aspect and TV type.)
• AUDIO SETUP
Use this to set this unit audio output mode_
(Digital and LPCM output settings.)
• RATINGS
Use this to disable playback of adult DVDs so
that children cannot watch them. Note that
playback of adult DVDs cannot be disabled if the
rating level is not recorded on the DVD, but that
it is possible to disable playback of all DVDs.
• OTHER SETUP
These inctude special settings CAPTIONS.
3
Use the A and V cursor buttons to select the
desired setting item, then
press the ENTER button.
• DISC SETUR (See page 40.)
• OSD SETUR (See page 41.)
• VIDEO SETUR (See page 42.)
• AUDIO SETUR (See page 43.)
• RATINGS. (See page 44.)
l( $[Td #£NU I DENON
L
L _t_l__TUP
L v_0E
L _AT_
L ttTI_RS_
L> $i_lfPMEnU
4
Remote control unit
To exit the DVD setup mode
At the setup screen in step 1 on page 40, use the /_. and V cursor buttons to select "EXIT SETUP", then press the ENTER
button. It is also possible to quit by pressing the SETUP button on the remote control unit.
II ©ooo
234_ 0
L®
,.=®®.......
®,,®,@_,o
DENON
--2,3,4
Read page 40.
Use the A and V cursor buttons to select the
desired setting, then press the ENTER button.
• DIALOG
Use this to set the language of the sound
output from the speakers.
• SUBTITLE
Use this to set the language of the subtitles
displayed on the TV.
• DISC MENUS
Use this to set the language of the menus
recorded on the disc (top menu, etc.).
To exit the disc setup mode
Use the A and V cursor buttons to select
"DVD SETUP MENU", then press the ENTER
button.
• The screen returns to as it was in step 2.
Remote control unit
Remote control unit
I _ s_r_P I DENON
Use the /_. and V cursor buttons to select the
desired setting, then press the ENTER button.
• When "DIALOG" is selected:
• ENGLISH (Factory default)
Select this when you want to play the DVD with
the sound in English.
• FRENCH
Select this when you want to play the DVD with
the sound in French.
• SPANISH
Select this when you want to play the DVD with
the sound in Spanish.
• GERMAN
Select this when you want to play the DVD with
the sound in German.
• ITALIAN
Select this when you want to play the DVD with
the sound in Italian.
• DUTCH
Select this when you want to play the DVD with
the sound in Dutch.
Remote control unit
Remote control unit
4O