Denon AVR-3310CI Owner's Manual
  1. Manuals
  2. Brands
  3. Denon Manuals
  4. Stereo Receiver
  5. AVR-3310CI
  6. Owner's manual
Denon AVR-3310CI Owner's Manual

Denon AVR-3310CI Owner's Manual

Denon av surround receiver user manual
Hide thumbs Also See for AVR-3310CI:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Owner's Manual
AV SURROUND RECEIVER
AVR-3310CI
Owner's Manual
Owner's Manual
GAdditional functions editionH
GAdditional functions editionH
The AVR-3310CI owner's manual is organized in the following two volumes.
• GThe original versionH
• GAdditional functions editionH ············This version
This version contains descriptions of additional and changed functions only.
The additional and changed functions are items indicated by "
GUI Menu Map (vpage 5)
" in the GUI Menu Map.
Manuel de l'Utilisateur
Manuel de l'Utilisateur
GÉdition des fonctions supplémentairesH
GÉdition des fonctions supplémentairesH
Le manuel d'utilisation de l'AVR-3310CI est organisé en deux volumes, comme suit.
• GLa version originaleH
• GÉdition des fonctions supplémentairesH ·········· La présente version
La présente version contient uniquement les descriptions des fonctions supplémentaires
et modifiées.
Les fonctions supplémentaires et modifiées sont signalées par le symbole "
l'interface graphique GUI.
Plan du menu de l'interface graphique GUI (vpage 5)
" dans plan du menu de

Advertisement

Table of Contents
loading

Related Manuals for Denon AVR-3310CI

Summary of Contents for Denon AVR-3310CI

  • Page 1 The additional and changed functions are items indicated by “ GUI Menu Map (vpage 5) Manuel de l’Utilisateur Manuel de l’Utilisateur Le manuel d’utilisation de l’AVR-3310CI est organisé en deux volumes, comme suit. • GLa version originaleH • GÉdition des fonctions supplémentairesH ·········· La présente version La présente version contient uniquement les descriptions des fonctions supplémentaires et modifiées.

  • Page 2: Table Of Contents

    Acoustics (Audyssey™ Auto Setup)· · ···········································6 Making Detailed Settings (Manual Setup)··································8 Playback Adjusting the Sound and Picture Quality (Audio/Video Adjust)···································································11 Adjusting·the·Sound·(Audio·Adjust)············································· 11 Other Information Surround·······················································································17 Surround·Modes·and·Parameters· · ·············································· 17 Unavailable Functions After Upgrading ···················19 Specifications ·········································································20 NOTE When·upgrading,·the·RS-232C·connector·cannot·be·used·for·the· DENON·RF·remote·controller. For·details,·see·“Unavailable·Functions·After·Upgrading”·on·page·...

  • Page 3: Getting Started

    Getting Started Part Names and Functions Remote Control Unit Main Remote Control Unit (RC-1118) When upgrading, the function of the button shown below is modified. For the other buttons, refer to page 7 of GThe original versionH Operating Instructions. Rear SPEAKERS button ···························································································· (12, 15) Amp Assign (vpage 8) Front Height Front Wide Surround Mode Function when the button is (vpage 69 of GThe original pressed versionH Operating Instructions) STANDARD Audyssey DSX ON/OFF (vpage 15) DSP SIMULATION Front Height ON/OFF (vpage 12)

  • Page 4: Connections

    ENGLISH Connections Installing / Setting the Speakers Audyssey DSX™ is a function to reproduce sound with deeper and more spacious surround space. To use Audyssey DSX, install front wide or front height speakers. a Determine the Speaker Layout Installing All the Speakers Front height speakers Front speakers Front wide speaker Subwoofer Center speaker Surround speaker Surround back speakers NOTE It is not possible to use the surround back speakers, front height speakers and front wide speakers simultaneously.

  • Page 5: Speaker Connections

    Set the “Amp Assign” Mode According to the Speaker Layout The signals output from the AVR-3310CI’s SURR. BACK/AMP ASSIGN speaker terminals can be switched (vpage 8 “Amp Assign”). Amp assign SURR. BACK / mode AMP ASSIGN (vpage 8) Speaker connections Front Height Front Height Speakers Front Wide Speakers Front Wide Speaker Connections Installing / Setting the Speakers...

  • Page 6: Settings

    ENGLISH Settings GUI Menu Map indicates functions modified by upgrading. MENU Pressing displays the GUI menu. From this menu, you can move to various setting screens. Items that only need to be set once Set these for example upon purchase. Once these items are set, there is no need to set them again unless the speaker layout or the connected speakers have been changed.

  • Page 7: Make The Optimal Speaker Settings, And Correct The Room Acoustics (Audyssey™ Auto Setup)

    Make the Optimal Speaker Settings, and Correct the Room Acoustics (Audyssey™ Auto Setup) The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. Audyssey Auto Setup Flow C onnect the Included Setup Microphone A udyssey Auto Setup Preparations Change the Amplifier Assignment (Amp Assign) (vpage 7)
  • Page 8 • When you are using surround back speakers with ZONE2/ZONE3, set to “ZONE2” or “ZONE3”. • You can set in the same way as described in “Amp Assign” on page NOTE Since “Amp Assign” of AVR-3310CI is set to “ZONE2” by default, audio is not output from the surround back speakers. When using the surround back speakers with MAIN ZONE, change the “Amp Assign” setting to “Normal”. Set the channel to be measured (Channel Select) vpage 30 of GThe original versionH Operating Instructions d Perform Audyssey Auto Setup...

  • Page 9: Making Detailed Settings (Manual Setup)

    Front A Bi-Amp : The bi-amp audio signals are output. Set this for bi-amp playback of the front A speakers. Front B Bi-Amp : The bi-amp audio signals are output. Set this for bi-amp playback of the front B speakers. Front Height : The front height channel audio signals are output. Front Wide : The front wide channel audio signals are output. S ince “Amp Assign” of AVR-3310CI is set to “ZONE2” by default, audio is not output from the surround back speakers. When using the surround back speakers with MAIN ZONE, change the “Amp Assign” setting to “Normal”. :Displaying the menu Main remote control Cancel the menu operation buttons...
  • Page 10 ENGLISH Making Detailed Settings (Manual Setup) Setting items Speaker Configuration Surround Back : Set the presence, size and number of surround back speakers. (Continued) • Large : Use of a large speaker that can adequately playback low frequencies. • Small : Use of a small speaker that has inadequate playback capacity for low frequencies.
  • Page 11 Setting items Setting contents Channel Level Test Tone Start : Output test tone. • Front L / Front Height L / Center / Front Height R / Front R / Front Set the volume of the test Wide R / Surround R / S. Back R z / S. Back L z / Surround L / Front tone to be the same when it Wide L / Subwoofer : Select the speaker. is output from each speaker. z : W hen the “Speaker Configuration” – “Surround Back” setting (vpage 9) is set to “1spkr”, “S. Back” is displayed.

  • Page 12: Playback

    ENGLISH Playback Adjusting the Sound and Picture Quality (Audio/Video Adjust) For details on how to select, set and cancel settings for each menu, see “GUI Menu Operation” (vpage 26 of GThe original versionH Operating Instructions). When upgrading, contents of “Audio Adjust” are modified. For setting “Audio Adjust”, make settings by referring to this manual but not GThe original versionH Operating Instructions.
  • Page 13 Cancel the menu operation buttons Setting items Surround Parameters (Continued) [SPEAKERS] in DENON original [SPEAKERS] in DENON original :Moves the cursor (Up/Down/Left/Right) Adjusting the Sound and Picture Quality (Audio/Video Adjust) Setting contents AFDM (Auto flag detect mode) : Detects the source’s surround back channel signal and sets the optimum surround mode automatically. • OFF : Do not set.
  • Page 14 ENGLISH Adjusting the Sound and Picture Quality (Audio/Video Adjust) Setting items Surround Parameters (Continued) • This can also be set by pressing STANDARD. • If the source being played contains a surround back signal, the decoder type is automatically selected by the AFDM function. Set “AFDM” to “OFF” to switch to your preferred decoder. • If the setting in “Speaker Configuration” – “Surround Back” (vpage 9) is “None”, “Surround Back” is not displayed. Subwoofer Att. : Attenuate subwoofer level when using EXT. IN input. • ON : Set. •...
  • Page 15 Setting items Setting contents Audyssey Settings Dynamic EQ : Solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room (Continued) acoustics. • ON : Use the Dynamic EQ equalizer. • OFF : Do not use the Dynamic EQ equalizer. • A fter performing “Audyssey Auto Setup”, the “Dynamic EQ” setting automatically becomes “ON”. • “ ” is displayed when set to “ON”.
  • Page 16 ENGLISH Adjusting the Sound and Picture Quality (Audio/Video Adjust) Setting items Audyssey Settings Operation on the main remote control unit (Continued) Dynamic EQ / Volume : ON “Green” “Green” About Dynamic Volume Audyssey Dynamic Volume™ solves the problem of large variations in volume level between television programs, commercials, and between the soft and loud passages of movies. Audyssey Dynamic EQ ® is integrated into Dynamic Volume so that as the playback volume is adjusted automatically, the perceived bass response, tonal balance, surround impression, and dialog clarity remain the same.
  • Page 17 Setting items Setting contents Manual EQ Adjust CH : Correct the tone of each speaker. Use the graphic equalizer q Select the speaker tone adjustment method. to adjust the tone of each All : Adjust the tone of all speakers together. speaker. L/R : Adjust the tone of left and right speakers together. Each : Adjust the tone of each speaker. w S elect the speaker. e S elect the adjustment frequency band. 6 3Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz S elect the speakers you want to adjust when “L/R” or “Each” is selected.

  • Page 18: Other Information

    ENGLISH Other Information Surround Surround Modes and Parameters Surround Mode Front Surround Center PURE DIRECT, DIRECT (2ch) MULTI CH DIRECT STEREO EXT. IN MULTI CH IN DOLBY PRO LOGIC gz DOLBY PRO LOGIC gx DOLBY PRO LOGIC g DTS NEO:6 DOLBY DIGITAL DOLBY DIGITAL Plus DOLBY TrueHD DTS SURROUND DTS 96/24 DTS-HD DTS EXPRESS 5CH/7CH STEREO ROCK ARENA JAZZ CLUB MONO MOVIE VIDEO GAME MATRIX VIRTUAL S : Signal / Adjustable A : No signal / Not adjustable D : T urned on or off by speaker configuration setting NOTE1 : T his parameter is availabe when the “Mode” is set to “Cinema” (vpage 11).
  • Page 19 Surround Mode Front Delay Time Subwoofer Height PURE DIRECT, DIRECT (2ch) MULTI CH DIRECT STEREO EXT. IN MULTI CH IN DOLBY PRO LOGIC gz DOLBY PRO LOGIC gx DOLBY PRO LOGIC g DTS NEO:6 DOLBY DIGITAL DOLBY DIGITAL Plus DOLBY TrueHD DTS SURROUND DTS 96/24 DTS-HD DTS EXPRESS 5CH/7CH STEREO ROCK ARENA JAZZ CLUB MONO MOVIE VIDEO GAME MATRIX S (30 ms) VIRTUAL S : Signal / Adjustable A : No signal / Not adjustable NOTE7 : BASS +6 dB, TREBLE +4 dB NOTE8 : Cannot be set when the “Dynamic EQ” (vpage 14) setting is “ON” . NOTE9 : Cannot be set when the “MultEQ” (vpage 13) setting is “OFF” . NOTE10 : Cannot be set when the “Dynamic EQ” (vpage 14) setting is “OFF”...

  • Page 20: Unavailable Functions After Upgrading

    ENGLISH Unavailable Functions After Upgrading When upgrading, the RS-232C connector cannot be used for the DENON RF remote controller. Connecting Devices External Controller vpage 22 of GThe original versionH Operating Instructions RS-232C connector When you connect an external control device, you can control the AVR-3310CI with the external control device. Perform the operation below beforehand. Turn on the AVR-3310CI’s power. T urn off the AVR-3310CI’s power from the external controller. Check that the AVR-3310CI is in the standby mode. Set as Necessary Set this to use the RS-232C connector for the DENON RF remote controller. “232C Port”...

  • Page 21: Specifications

    Specifications Audio section • Power amplifier Rated output: Front: 120 W + 120 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) 160 W + 160 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 120 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) 160 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Surround: 120 W + 120 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) 160 W + 160 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Surround back: 120 W + 120 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) 160 W + 160 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Front height / Front wide: 120 W + 120 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) 160 W + 160 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Dynamic power: 130 W x 2ch (8 Ω/ohms) ...
  • Page 22 D&M·Holdings·Inc. 5411·10441·009D...

Table of Contents