Denon ADV-700 Operating Instructions Manual page 46

[] TROUBLESHOOTING
1Are all the connections correct ?
• Are you following the instructions in the manual ?
• Are the speakers and other components operating properly ?
If this unit does not seem to be functioning properly, check the table below_ If this does not solve the problem, this unit may be
damaged. Turn off the power, unplug the power cord from the power outlet, and contact your store of purchase or nearest Denon
sales office.
6
o
o
E
E
8
cc
Symptom Cause Measures Page
DISPLAY not lit and sound not • Power cord not plugged in securely. • Check the insertion of the power cord 5
produced when power switch set to plug.
on
DISPLAY lit but sound not produced.
Monitor doesn't display an image
• Speaker cords not securely connected
• Improper position of the audio function
button
• Volume control set to minimum
• MUTING is on
• Digital signals not input Digkal input
selected
• Connections between the video output
jack of this unit and the input connector
of the monitor are incomplete
• The input setting of the monitor TV is
different
• The video signals of the vadous devices
are not uniform.
• Connect securely.
• Set to a suitable position.
• Turn volume up to suitable level.
• Switch off MUTING
• Input digital signals or select input jacks
to which digkal signals are being input.
• Check whether the connections are
correct
• Set the input switching of the TV to the
jack to which the video input is
connected
• Make settings uniform for either
composite video or S-video connectors.
8
19
19
20
19
6,7
6,7
The program cannot be copied from • Almost all movie software contains a • A copy cannot be made.
DVD to the VCR copy prevention signal
• Switch on the power of the subwoofer.
The subwoofer does not produce
sound.
• Power is not being supplied to the
subwoofer
• The subwoofer setting is made to IrNo'l
in the setup
• The output of the subwoofer has not
been connected
• Change the setting to "Subwoofer" in
the setup.
• Make the proper connections
14
8
• The surround mode is set to a mode • Set to auto decode 22
The test tone is not output
other than auto decode
• Replace with new batteries.
• Move closer
• Remove obstacle
• Batteries dead
• Remote control unit too far from this
unit
• Obstacle between this unit and remote
control unit
• Different button is being pressed
• _) and O ends of battery inserted in
reverse.
• The mode selection of the remote
control is not propedy selected The
DVD mode, AV mode, or audio mode is
not properly selected
This unit does not operate properly
when remote control unit is used.
• Press the proper button
• Insert batteries properly
• Press the remote control mode
selection button for the item you wish
to operate To operate this unit, use
with the DVD mode
10
10
10
9
10
9
Symptom Check Page
Playback does not start when PLAY • Is there condensation on the disc or player ? (Let stand for 1 or 2 hours)
button is pressed. • Discs other than DVDs, video CDs and music CDs cannot be played. 4
Playback stops immediately. • Disc iS dirty. Wipe off the dirt 5
Menu playback of video CD's is not • Menu playback is not possible with anything but video CDs with playback control.
possible
Picture is disturbed during the search • Some disturbance is normal
operation
Buttons do not operate • Some operations are disabled for some discs 18
• Subtitles are not displayed for DVDs not containing subtitles
No subtitles are displayed
• Subtitles are turned off Turn the subtitles setting on 40, 41
• The audio (or subtitle) language does not switch for discs which do not include multiple 35
Audio (or subtitle} language does not audio (or subtitle) languages
switch • For some discs the audio (or subtitle) language cannot be switched when the operation 37
to switch it is performed, but can be switched on the menu screens
o • The angle cannot be switched for DVDs which do not contain multiple angles In some 36
Angle does not switch, cases multiple angles are only recorded for specific scenes.
Playback does not start when the • Check the "RATINGS SETUP" setting 44
title is selected
• While the player is in the stop mode, hold the player's SKIP (1_1_1) button and the 44
The password for rating level has
PAUSE (11) button down simultaneously for longer than 3 seconds (until 'gNIT[ALIZE"
been forgotten
disappears from the TV monitor).
Reset all the DVD setting to
The lock will be released and the DVD all default settings and picture settings will return
Factory Preset.
to the default values
The disc is not played with the audio • The disc does not play with the selected audio or subtitle language if that audio or 35
or subtitle language set as the subtitle language is not included on that DVD.
default setting
Picture is not displayed in 4:3 (or • Set the "TV ASPECT" default setting to the proper setting for the connected TV 42
16:9)
Menu screen messages for the • Check the default setting for the disc language's menu language. 40, 41
desired language do not display
46