Adding System Memory - Intergraph TD-20 Setup Manual

38

Adding System Memory

You can add system memory by adding or replacing single inline memory modules (SIMMs)
on the system board. The following illustrations show the four SIMM sockets on the system
board, which can hold up to 256 MB of random-access memory (RAM). The computer
supports the use of Extended Data Out (EDO), Error Checking and Correction (ECC), and
Past Page Mode (FPM) dynamic RAM (DRAM) memory.
TD-20
The system board supports the following SIMM sizes:
SIMM size
4 MB
8 MB
16 MB
32 MB
64 MB
Memory Bank 0
Memory Bank 1
Configuration (non-parity)
1 x 32
2 x 32
4 x 32
8 x 32
16 x 32
TD-200
Configuration (parity)
1 x 36
2 x 36
4 x 36
8 x 36
16 x 36