Intergraph TD-20 Setup Manual page 32

20
5. Insert a diskette into the floppy disk drive.
6. In the directory containing the
creates a boot diskette with the new BIOS file and the BIOS flash programming utility.
7. After the
restart the system.
8. When prompted, press
9. If you want to save the current BIOS, select Save Flash Memory Area To a File and press
ENTER
10. Insert an empty, formatted diskette into the floppy disk drive.
11. Select Save System BIOS and press
12. When prompted to enter a path to the file, type a:\save.bio and press
13. When prompted to enter the Flash Data Image title, type save and press
14. Remove the diskette from the floppy disk drive and label it Previous BIOS date, where
date is today's date.
15. From the main menu, select Update Flash Memory From a File and press
16. Select Update System BIOS and press
17. When prompted to enter a path to the file, press
the up/down arrow keys to select drive [-A-], and then press
the BIOS version (for example, 1011CS1_.BIO), and then press
18. When prompted that the BIOS is about to be changed, press
19. After the BIOS has been successfully updated, remove the diskette from the floppy disk
drive. Label the diskette BIOS Update date, where date is today's date.
20. Press
ENTER
turn on power to the system again.
21. As the system boots, make sure that the BIOS version displayed is the new version; then
press
F
22. In BIOS Setup, press
not do this, the system may not function correctly with the new BIOS.
23. Re-enter the parameter settings you recorded before you updated the BIOS.
24. After re-entering the parameter settings, make sure that they match the settings you
recorded before you updated the BIOS.
25. Save and exit from BIOS Setup.
26. Restart the system.
. program completes, leave the diskette in the floppy disk drive and
INSTALL BAT
to go to the main menu.
ENTER
. Otherwise, go to step 15.
to restart the system. As the system boots, turn off power to the system; then
1 to enter BIOS Setup.
5 to return the BIOS parameters to their default settings. If you do
F
files, run the
FLASHPROG
.
ENTER
.
ENTER
to select the Directories box. Press
TAB
. program. This
INSTALL BAT
.
ENTER
.
ENTER
.
ENTER
. Press to select
ENTER TAB
.
ENTER
.
ENTER