Intergraph TD-20 Setup Manual page 51

The following are common memory configurations:
Memory
8 MB
16 MB
24 MB
32 MB
48 MB
64 MB
72 MB
96 MB
128 MB
256 MB
When adding or replacing SIMMs:
u
Use 72-pin, 60 ns, single-or double-sided SIMMs with tin-plated contacts.
u
Install SIMMs one bank at a time, beginning with bank 0.
u
Fill both slots in a bank.
u
Use the same size SIMM in both slots in a bank.
u
After adding or replacing SIMMs, restart the computer. The new memory configuration
is detected automatically.
NOTE System memory modules available from Inter graph have been certified for use with Intergraph
computers at extremes of temperature and system load to ensure reliable performance.
System memory modules available from other vendors may function improperly or unreliably
in your Intergraph computer.
For more information on system memory, refer to the appropriate System Board Manual.
Bank 0 Bank 1
2 4-MB SIMMs 2 4-MB SIMMs
2 4-MB SIMMs 2 4-MB SIMMs
2 8-MB SIMMs
2 8-MB SIMMs 2 4-MB SIMMs
2 16-MB SIMMs
2 8-MB SIMMs 2 8-MB SIMMs
2 16-MB SIMMs 2 8-MB SIMMs
2 32-MB SIMMs
2 16-MB SIMMs 2 16-MB SIMMs
2 32-MB SIMMs 2 4-MB SIMMs
2 32-MB SIMMs 2 16-MB SIMMs
2 32-MB SIMMs 2 32-MB SIMMs
2 64-MB SIMMs
2 64-MB SIMMs 2 64-MB SIMMs
39