About This Document; Document Conventions - Intergraph TD-20 Setup Manual

viii

About This Document

TD-20, TD-200 System Setup is organized as follows:
u
Chapter 1, "Setting Up the Hardware," describes how to set up the system hardware.
u
Chapter 2, "Setting Up the Software," describes how to set up the operating system and
associated system software.
u
Chapter 3, "Configuring the System," describes how to configure the system for use.
u
Chapter 4, "Operating Notes," provides information you will need when operating the
system.
u
Chapter 5, "Installing System Software," provides information you will need if you must
re-install the operating system and associated system software.
u
Chapter 6, "Expanding the System," provides information on expanding the system by
adding external and internal peripheral devices, expansion boards, and system memory.

Document Conventions

Bold
Italic
Monospace
SMALL CAPS
+
CTRL D
Commands, words, or characters that you key in literally.
Variable values that you supply, or cross-references.
Output displayed on the screen.
Key names on the keyboard, such as
directories. You can type filenames and directory names in the dialog boxes
or the command line in lowercase unless directed otherwise.
Press a key while simultaneously pressing another key; for example, press
and simultaneously.
CTRL D
, or 3; names of files and
D ALT F