Configuring An M90X Mobile Terminal - Aastra NeXspan S Installation And Maintenance Manual

3.11.2 CONFIGURING AN M90X MOBILE TERMINAL

3.11.2.1 REGISTERING AN M90X MOBILE TERMINAL
PRELIMINARY OPERATIONS
Check that the mobile is not already registered. To cancel the previous registration,
refer to the section "Cancelling the registration of an M90xx portable handset"
Check that the handset has been declared on the OMM interface (see the section
"Portable Parts").
Check that the registration of the handset is authorised on the OMM interface
(Portable Part/Registration).
A. Check that the handset is not already duly registered.
The portable handset must not contain any "parasite" registrations (for example, from
previous use on another DECT system). In the standard case where the handset is to be
used on one DECT system only, it must not be registered on any other base at the
outset.
• At startup, if the handset displays:
it is not currently registered on any other base. Pressez alors sur la touche
and proceed to step 7 under paragraph B).
If the mobile displays:
it is already registered on at least one other base.
1. Press the
2. Press the middle
3. Press the Select base
• Any base numbers already in use are displayed. If they are used unduly, they must be
de-registered on the handsetErreur ! Aucun nom n'a été donné au signet..
B. Register the cordless handset on a base
1. Press the
2. Press the middle
3. Press the
4. Press the middle
5. Press the
The handset display shows: "Declare base no. 1 2 3 4 5 6 7 8".
Page 25
Declare base number?
1 2 3 4 5 6 7 8
Mobile
Out of range
Redial
Menu key.
key. "Select base" is displayed
key.
Menu key
key. "Personalize" is displayed
Personalize key
or key several times until "Declare base" is displayed
Declare base key
01/2007
OK
Menu
AMT/PTD/PBX/0062/1/2EN
OK