Installing The Msa San Switch 2/8 In The Msa1000 - HP StorageWorks MSA 2/8 - SAN Switch Installation Manual

Installing the MSA SAN Switch 2/8 in the MSA1000

Note:
be installed and uninstalled regardless of whether the MSA1000 is powered on.
MSA SAN Switch 2/8 Installation Guide
Caution: To prevent static shock, which can damage electrical equipment, use
industry accepted handling practices when unpacking and moving the switch.
See the "Electrostatic Discharge" appendix for more information.
The MSA SAN Switch is a hot-pluggable component of the MSA1000 and can
Caution: Depending on the operating systems of the servers already attached
to the MSA1000 and the applications they are running, verify that they can
tolerate a temporary disruption while the MSA SAN Switch is installed.
Contact your operating system and application vendors for verification.
Installing the MSA SAN Switch 2/8
23