Switch Readiness Led Definitions; Port Speed Led Definitions - HP StorageWorks MSA 2/8 - SAN Switch Installation Manual

Managing the MSA SAN Switch 2/8

Switch Readiness LED Definitions

Table 4: Switch Readiness LED Definitions
No light
Steady green
Steady yellow
Slow flashing yellow
(on 1 second;
off 1 second)

Port Speed LED Definitions

Table 5: Port Speed LED Definitions
No light
Steady green
46
LED Color
Switch has no power.
Switch is on and all ports
are ready for use.
One or more ports are
offline
OR
Switch is booting and has
not logged into the
MSA1000.
Error log contains one or
more port diagnostic
error messages.
LED Color
Port is transmitting at
1 Gb/s
Port is transmitting at
2 Gb/s
Hardware Status
Hardware Status
MSA SAN Switch 2/8 Installation Guide
Recommended Action
Verify switch is installed
correctly.
No action required.
Verify the switch has
completed booting and is
not disabled. If light is still
yellow, check the error log
and the Port Status LEDs.
Check error log, port
status LEDs, port media,
and cables or loopback
plugs.
Recommended Action
No action required.
No action required.