Ethernet Port; Serial Port - HP StorageWorks MSA 2/8 - SAN Switch Installation Manual

Ethernet Port

This connector is used to connect the switch to the SAN management network.
Switch configuration and management tasks can be made through the Ethernet
port either by using a telnet connection to access the CLI or by using a standard
web browser to access the Web Tools graphical user interface.
By default, the switch is configured to use an IP address of 10.77.77.77.
See "Configuring the MSA SAN Switch 2/8" for information on setting the IP
address.

Serial Port

This connector is provided for switch configuration and management. You can
access the CLI through a terminal or terminal emulator connected to this port.
The MSA SAN Switch is designed to function directly out of its shipping carton,
only requiring the IP address to be set.
See "Configuring the MSA SAN Switch 2/8" for more information.
MSA SAN Switch 2/8 Installation Guide
About the MSA SAN Switch 2/8
19