Requirements - HP StorageWorks MSA 2/8 - SAN Switch Installation Manual

Configuring the MSA SAN Switch 2/8

Requirements

The following items are required to set network addressing:
30
An IP address from your Network Administrator
An installed MSA SAN Switch
Serial cable (supplied with the switch) for connecting the switch to the
workstation
This cable must be a straight-through cable.
A local workstation (desktop or notebook computer) with a serial terminal
connection
RS-232 serial communication software (for example, ProComm Plus or
HyperTerminal)
Ethernet cable for connecting the switch to the workstation or to a network
containing the workstation
This cable can be a cross-over cable or a straight-through cable.
SFPs and fiber cables, as required, to connect the switch to the fabric
MSA SAN Switch 2/8 Installation Guide