Command Line Interface (Cli) Overview; Cli Initial Menu - HP StorageWorks MSA 2/8 - SAN Switch Installation Manual

Command Line Interface (CLI) Overview

As already detailed, the CLI must be used to initially set the IP address of the
switch. In addition to this initial configuration task, this user interface can be used
to complete the switch configuration and perform maintenance tasks.
All MSA1000 supported operating systems can use the CLI to manage their
switch.
Figure 8: CLI initial menu
For details on using the CLI to manage your MSA SAN Switch, refer to the HP
StorageWorks Fabric OS Procedures Guide and the HP StorageWorks
Reference Guide. These manuals are available on the documentation CD, included
in the shipping carton with the switch.
MSA SAN Switch 2/8 Installation Guide
Managing the MSA SAN Switch 2/8
F
abric OS
39