Performing A Firmware Upgrade Through Web Tools - HP StorageWorks MSA 2/8 - SAN Switch Installation Manual

2. Locate the panel for this switch and view the display.

Performing a Firmware Upgrade through Web Tools

To download the latest version of the firmware on the switch:
1. Download the firmware from the HP website at http://www.hp.com.
2. Access Web Tools.
3. Click the Admin icon button (next to the switch panel display) to go to the
4. Select the Firmware Upgrade (Firm Upgrd) tab.
MSA SAN Switch 2/8 Installation Guide
If necessary, click the Detail View button to display more information.
The following information is displayed for the switch:
Name
Fabric OS version
Domain ID
Ethernet IP
Ethernet Mask
FCnet IP
FCnet Mask
Gateway IP
WWN
Go to the Support page for the required loaders and instructions.
Administrative Interface.
At the prompt, enter a user name and password with administrative privileges
and click OK.
The Administrative Interface is displayed, with the Switch Settings tab
selected by default.
The Firmware Upgrade page is displayed.
Figure 12 is an illustration of this Firmware Upgrade page.
Backing Up Configuration Data and Upgrading Firmware
57