Laser Product Label; Laser Information; Laser Specifications - HP StorageWorks MSA 2/8 - SAN Switch Installation Manual

Regulatory Compliance Notices

Laser Product Label

The following label or equivalent is located on the surface of the HP supplied laser
device.
This label indicates that the product is classified as a CLASS 1 LASER
PRODUCT. This label appears on a laser device installed in your product.

Laser Information

The following table lists laser specifications.
Table 7: Laser Specifications
Wave length
Divergence angle
Output power
Polarization
Numeric aperture
64
Item Specification
850 nm ± 35 nm
53.5 degrees ± 4.5 degrees
Less than 2.0 mW or 10,869 Wm-2
sr-1
Circular 0.25
0.45 inches ± 0.04 inches
MSA SAN Switch 2/8 Installation Guide