Configuring Pressmarks Settings - Xerox FreeFlow Operator And Administrator Manual

Configuring Pressmarks settings

F r e e F l o w P r o c e s s M a n a g e r O p e r a t o r a n d A d m i n i s t r a t o r G u i d e
The Pressmarks node allows you to add a fixed pressmark to a
workflow. You can specify the pressmark placement, rotation,
frequency, transparency, and then preview the specifications.
To set up or modify a pressmark
1. Double-click a Pressmarks process in a workflow to open the
Add Pressmarks dialog.
2. To preview the pressmark placement in the document, select
[Preview>>]. For more information about the Preview option,
see Previewing job level
3. Select one of the following:
• Select [New], and then select [Image Pressmark] to open
the New Image Pressmark dialog and set up a pressmark.
• Select a pressmark from the list, and then select [Modify]
to open the Modify Image Pressmark dialog and change
the pressmark.
• To Duplicate or delete a pressmark, see
deleting a
4. Select [Browse] to locate an image file of the type listed in the
drop box.
NOTE: The selected image must reside on a local drive.
a. In the Browse for Pressmark Image File dialog, select a
file.
b. Select [Open]. The dialog closes and the path and file
name display in the Pressmark filename text box.
5. In the Modify Image Pressmark or New Image Pressmark
dialog, select a percentage from 1 to 200 to scale the image.
6. Select or type the horizontal position from the PDF document
box: [From left], [Center], or [From right].
7. Select or type the vertical position from the PDF document
box: [From top], [Center], or [From bottom].
8. Select a position relative to [Crop Box], [Media Box], [Bleed
Box], [Trim Box] or [Art Box].
edits.
pressmark.
Wo r k f l o w B u i l d e r
Duplicating or
2-103