Safety; Ozone Safety - Xerox FreeFlow Operator And Administrator Manual

Safety

Ozone Safety

x
Canada
The equipment does not exceed the class A limits for radio noise
emissions from a digital apparatus as documented in the radio
interference regulations of the Canadian Department of
Communications.
Cet appareil numÈrique est conforme aux limites d'Èmission de
bruits radioÈlectriques pour les appareils de classe A stipulÈes
dans le RÈglement sur le brouillage radioÈlectriques du ministÈre
des Communications du Canada.
Europe 50HZ, 220V-240V Equipment
The equipment was tested and is certified in conformance with the
European commission directive 82/499/ECC and VDE 0871/
0875, class B which relates to radio frequency interference. This
equipment is certified, manufactured and tested in compliance
with strict safety and radio frequency interference regulations.
Your Xerox equipment and supplies were designed and tested to
meet strict safety requirements. These include safety agency
examination, approval and compliance with established
environmental standards.
Attention to the following notes ensures the continued safe
operation of your equipment.
If you need any additional safety information concerning the
equipment or materials, contact your local representative.
This product will produce ozone during normal operation. The
ozone produced is heavier than air and is dependent on copy
volume. Providing the correct environmental parameters as
specified in the Xerox installation procedures will ensure that the
concentration levels meet safe limits.
If you need additional information about ozone, please request the
Xerox publication Ozone (part number 600E74140) by calling 1-
800-828-6571 in the United States and Canada.
F r e e F l o w P r o c e s s M a n a g e r O p e r a t o r a n d A d m i n i s t r a t o r G u i d e