Xerox FreeFlow Operator And Administrator Manual page 193

F r e e F l o w P r o c e s s M a n a g e r O p e r a t o r a n d A d m i n i s t r a t o r G u i d e
To enable the Copy Count Divisor
You can enable the system to adjust the copy count to maintain
the original quantity intent for workflows that contain multiple-up
impositions. The value is changed to output the original quantity of
the original document given that the imposition node has changed
the PDF document to contain multiple instances of the original
document.
In the Job Manager Copy Count and the Print node Job Setup
dialogs, the quantity value is modified when you:
• Process the job through a Xerox imposition node (not PREPS)
that is multi-up repeated.
• Enable the Copy Count Divisor switch.
• Submit a job with a job ticket quantity intent.
• Use Print nodes that do not have "Always use these settings"
selected.
Example: If the original document is 1 page, the original quantity
is 100 copies, and the imposition is 4-up repeated, then the post
imposition copy count quantity will be 25, since each copy of the
imposed document now contains 4 copies of the original
document.
If there is a JDF Export node in the workflow, the JDF ticket
created through the JDF export node does not include the
modified copy count.
See also:
Copy Count Divisor examples
1. In Workflow Builder, select [Options: Processes] to display
the Processes dialog.
2. Select the Impose process, then select [Settings] to open the
Impose Process Settings dialog.
3. Mark the check box for [Imposition affects copy count].
4. As appropriate, select or deselect the check box to place the
process online.
5. Select [OK] to accept the changes and close the Process
Settings for [Process] dialog.
6. Close the Processes dialog.
Wo r k f l o w B u i l d e r
2-141