Configuring Xjdc/Unix; Xjdc Hints And Tips - Xerox 6100BD - Phaser Color Laser Printer System Manual

Troubleshooting

Configuring XJDC/Unix

XJDC hints and tips

8- 1 8
The configuration file, CONFIG.TXT found in the directory /opt/
XRXnps/bin/, contains default parameters for the invocation of
XJDC. The text file can be edited using any simple text editor.
The first line of the configuration file must not be edited; it contains
XJDC version information. Each subsequent line contains a single
option; any text following the first word, and any invalid options,
are ignored. Options may be repeated or contradicted on following
lines; the last option specified overrides previous options. The
following sample configuration file is provided:
XJDC VM10 PDL Compiler
REPLACE
NODISPLAY
PRINT
TRUNCATE
LABEL
COMPILE
SINGLEBYTE
VM10
PAPERSIZE=USLETTER
DATE=US
PAGINATE=60
OUTPATH =/opt/XRXnps/resources/lcds
• If the config file needs to be changed, modify the /opt/XRXnps/
XRXXJDC/data/CONFIG.TXT file. Otherwise, the default
setting in the CONFIG.TXT file takes effect.
• An example for the syntax /opt/XRXnps/bin/XJDC filename
would be: /opt/XRXnps/bin/XJDC /home/XDJCtest/BASIC.JSL
where the filename is represented by /home/XJDCtest/
BASIC.JSL
• The output files are stored under the OUTPATH directory
which is specified in either /opt/XRXnps/bin/CONFIG.TXT file
or command line. For example, if OUTPATH is /opt/XRXnps/
temp/, then all the output files are put in the directory of /opt/
XRXnps/temp.
System Guide