Panasonic Digital Palmcoder PalmSight PV-DV100 Operating Instructions Manual page 64

If you have a problem with your Palmcorder, it may be something you can correct yourself.
Check the list below for symptoms and corrections.
Symptom
No picture in the EVF or LCD Monitor ...
Correction
• Make sure the Power Source is connected.
(pp. 10, 11)
• Make sure the POWER switch is set to ON.
(pp. 28, 33)
• Check the Dew Indicator. (p. 27)
• Make sure the battery is fully charged. (p. 9)
• Make sure all necessary cables are connected
correctly and firmly. (p. 11)
Video cassette can't be inserted .... Make sure the Lens Cap is removed. (p. 28)
• Make sure the Power Source is connected.
(pp. 10, 11)
Video cassette can't be removed ... • Insert the cassette with the window side facing up.'
(p. 7)
No operation starts when operation buttons • Make sure the Power Source is connected.
are pressed ... (pp. 10, 11)
Recording cannot be done .... Check the Dew Indicator. (p. 27)
• Make sure the record tab is closed. (p. 13)
• Check the Battery Indicator. (p. 25)
Auto Focus does not operate .... Make sure the FOCUS is set to AUTO. (p 45)
• Make sure the unit is ON with CAMERA mode.
(p. 28) I
Sound from microphone can't be monitored • Make sure the unit is set to REC or Record/Pause I,
t
,.. mode. 1
Sound can't be heard ... ° Make sure the Audio on the VCR MENU is set to F
ST1. (pp. 22, 49)
64