Panasonic Digital Palmcoder PalmSight PV-DV100 Operating Instructions Manual page 38

_TV with AUDIO/VIDEO IN Jacks. )
A/V
OUT
Audio In Video In
--A/V Cable
(Supplied) _
; ov,deo
_V with S-VIDEO IN Jacks. ]
For best Chrominance and Luminance, it is
suggested to use the S-Video connection if
available on your TV.
NV OUT
OUT
Set POWER to CAMERA.
You can now view what the Palmcorder
is recording on your TV.
Or, to playback a tape, set POWER to
VCR.
You can now playback a recorded tape
on your TV.
Turn your TV ON and set it to LINE
INPUT or S-VIDEO.
Check your TV operating instructions
for further information.
Start playback or begin a recording.
• Please fully connect the A/V cable to both
the camcorcler and the TV.
• Make sure the Palmcorder and TV are
turned off while connecting.
Optional Remote Control Only (page 58)
You can display the various EVF and LCD
indications on your TV by pressing
DISPLAY ON TV on remote control. Press
again to remove the indications.
Cable
(Supplied)
38
_Back of TV ]
I
Audio In S-Video in
To S-Video In
rCATV System Installer
This reminder is provided to call the
CATV system installer's attention to
Article 820-40 of the NEC in USA (and to
the Canadian Electrical code in Canada)
that provides guidelines for proper
grounding and, in particular, specifies
that the cable ground shall be connected
to the grounding system of the building,
as close to the point of cable entry as
,practical. ,,