Panasonic Digital Palmcoder PalmSight PV-DV100 Operating Instructions Manual page 12

Before you begin...
• Connect the Palmcorder to a power
source (pages 10, 11).
TAPE
EJECT Switch_
1
PUSH TO
2
CLOSE
mark
Slide TAPE EJECT to open the
Cassette Compartment Cover.
Insert a cassette with its window side
facing up.
Cassette Compartment
Cover
Press PUSH TO CLOSE mark to
close the Cassette Compartment
Cover.
• If the Palmcorder is connected to a power
source, the cassette can be inserted and
ejected without turning the Palmcorder
On.
Slide TAPE EJECT to open the
Cassette Compartment Cover.
Pull the cassette tape straight out.
Hint for recording position when
inserting Cassette
• When you insert a cassette that is
partially recorded, use the Edit Search
Function to search for the position from
which you want to record again.
Especially when you want to record again
on a cassette that is already fully
recorded, be sure to first locate the
position where you want to add the new
recording, before starting to record.
Note:
• If hand strap is tight it may prevent Cassette Compartment Cover from fully opening
for tape insert or eject. Loosen hand strap if necessary.
• When inserting the cassette, make sure it faces in the right direction and then push
in completely.
12