Panasonic Digital Palmcoder PalmSight PV-DV100 Operating Instructions Manual page 11

Slide the Batteryupwardwhilesliding
the
BATTERY RELEASE to remove
the Battery (page 10).
BATTERY RELEASE Switch
DC IN Terminal
Insert the DC Cable into the DC IN
Terminal.
Connect the other end of the DC
Cable to the AC Adaptor as shown.
Plug in the AC Adaptor.
• The POWER Lamp of the AC Adaptor
lights up.
DC IN Terminal t'_!
d_
0
DC Cable
(Supplied)
IER
Lamp
• When not in use, unplug the AC Adaptor
from the AC outlet. (AC Adaptor
consumes 1W of electric power when
plugged into an AC outlet even when not
in use.)
11